+86-15123173615
Excavator Crane Forklift Diesel KTA38 K38 KTA50 K50 Engine Piston 4090013 4097889 For Cummins Parts
video
Excavator Crane Forklift Diesel KTA38 K38 KTA50 K50 Engine Piston 4090013 4097889 For Cummins Parts

Excavator Crane Forklift Diesel KTA38 K38 KTA50 K50 Engine Piston 4090013 4097889 For Cummins Parts

Engine Piston:Engine Piston
Part No/TC type:4090013 4097889
Applicable to:diesel KTA38 K38 KTA50 K50 Engine Piston
Send Inquiry
Product Details ofExcavator Crane Forklift Diesel KTA38 K38 KTA50 K50 Engine Piston 4090013 4097889 For Cummins Parts

Chongqing Kyson Machinery Equipment Co., Ltd. is one of the leading manufacturers and suppliers of excavator crane forklift diesel kta38 k38 kta50 k50 engine piston 4090013 4097889 for cummins parts in China. With abundant experience, our factory offer high quality products made in China with competitive price. Welcome to place an order.

 

Technical Specification & Payment and Trade Terms & Delivery and Packaging

Engine Piston

Engine Piston

Part No/TC type

4090013 4097889

Brand Name

Man, ABB, PBS, KBB, Napier MET, Weicai, JTH

Other parts

pls contact freely
if you need other P/N

Engine Type

Diesel engine,Gas engine,
Diesel Generators etc.

Spare Type

Cartridge, Nozzle ring , shaft, rotor complete, compressor wheel, diffuser, turbine casing , compressor casing , bearing casing, turbine blades, bearing

Condition:

Original , brand new, OEM, replacement, refurbished

Applicable industry

Marine engines,
Construction works ,oil platform
Energy & Mining etc

Key Word:

Original spare parts
and engine repair tool kits

Trade terms

FOB EXW CIF DDU DDP,

Door to door is available in some countries.

Delivery time:

Most parts are in stock, bulk order based on qty

Payment

T/T, L/C,D/A, Alipay, Western Union, Paypal etc.

Place of origin

China/Germany/South Korea USA/Japan/Sweden /UK/Singapore/Taiwan

Package

Neutral or original packaging

About the product

The orientation of Cummins engine pistons can be accurately determined and installed using the following methods:

Arrow Marking: A directional arrow is typically stamped on the top surface of the piston. During installation, this arrow must be aligned to point toward the exhaust valve side-corresponding to the front end of a vertical engine.

IN and EX Markings: The piston crown may also feature "IN" and "EX" indicators, denoting the positions of the intake and exhaust valves, respectively. Proper installation requires positioning "IN" near the intake valve and "EX" adjacent to the exhaust valve.

Number Markings: Pistons are often labeled with numerals (1, 2, 3, 4), indicating the designated cylinder location within the engine block.

Small Notch Indicator: In certain piston designs, a small notch is present along the edge of the piston head. During assembly, this notch should align with the protrusion mark on both the connecting rod body and cap, and must face the front of the engine.

Installation Procedure:

Lubrication of Piston Pin: Prior to assembly, apply clean engine oil to the piston pin and corresponding bore. Securely install the piston pin to connect the piston and connecting rod, and ensure that retaining rings are properly fitted for secure fastening.

Piston Ring Installation: Install the piston rings in sequence according to the "TOP" marking. The scraper ring, oil ring expander, and second scraper ring must be staggered at specified angles to ensure optimal sealing and performance.

Connecting Rod and Bearing Assembly: Fit the bearing into the connecting rod, ensuring that all alignment notches are matched. Verify that the bearing's directional arrow corresponds with the arrow marked on the piston crown.

Installation of Piston-Connecting Rod Assembly: Apply a thin layer of lubricant to the inner surface of the cylinder bore. Carefully compress the piston rings and insert the piston-connecting rod assembly into the cylinder, making sure the designated mark on the connecting rod faces the direction of cylinder No. 1.

Tightening of Connecting Rod Cap Bolts: Once all components are correctly positioned, tighten the connecting rod cap bolts to a torque specification of 25 ± 3 N·m, followed by an additional 90 ± 5° rotation to achieve proper bolt stretch and clamping force.

 

Hot Tags: excavator crane forklift diesel kta38 k38 kta50 k50 engine piston 4090013 4097889 for cummins parts, China, factory, price, in stock, made in China, fuel pump plunger barrel, rocker lever housing, NTA855 KTA19 KTA38 KTA50 parts, Fuel Shutoff Solenoid Valve, diesel connecting rods, marine diesel aftercooler

Send Inquiry

(0/10)

clearall