Coolant Temperature Sensor Used 4326595 For Cummins Construction Machinery Parts

Desc.

Sensor

Part No

4326595

Brand Name

Cummins, Detroit, DCEC, CCEC, XCEC etc.

Other parts

pls contact freely if you need other P/N

Engine Type

Diesel engine, Gas engine, Diesel Generator, Marine engine, Construction engine Pump engine etc.

Spare Type

Wearing spare parts, maintenance tools, repair kit, upper and lower engine gasket kit.

Condition:

Original and brand new

Applicatble industriy

Retail, marine engines, Construction works, Energy & Mining etc

Key Word:

Original spare parts and engine repair tool kits

Trade terms

FOB EXW CIF DDU DDP,

Door to door is available in some countries.

Delivery time:

Most parts are in stock, bulk order based on qty

Payment

T/T, L/C, D/A, Alipay, Western Union, Paypal etc.

Place of origin

China/USA/Japan/Austria/Mexico

Package

Neutral or original packaging

About the product

The impact of the environment on sensors mainly includes the following aspects:

The high temperature environment causes problems such as melting of coating materials, cracking of solder joints, and structural changes in the stress inside the elastomer for sensors. High temperature resistant sensors are often used for sensors working in high-temperature environments; In addition, insulation, water cooling or air cooling devices must be added.

Dust and moisture can cause short circuits in sensors. Under these environmental conditions, sensors with high airtightness should be selected. Different sensors have different sealing methods, and there are significant differences in their sealing properties. Common seals include sealant filling or coating; Rubber pad mechanical fastening seal; Welding (argon arc welding, plasma beam welding) and vacuum nitrogen sealing. From the perspective of sealing effect, welding sealing is the best, while filling and applying sealant is the worst. For sensors working in clean and dry indoor environments, adhesive sealed sensors can be selected, while for sensors working in humid and dusty environments, membrane hot sleeve sealing or membrane welding sealing, vacuum filling and nitrogen filling sensors should be selected.

In highly corrosive environments, such as humidity and acidity, which can cause damage to the elastic body or short circuits in sensors, sensors with good corrosion resistance and good sealing properties should be selected by spraying or stainless steel covers on the outer surface.

The influence of electromagnetic field on the output disorder signal of sensors. In this case, the shielding of the sensor should be strictly checked to see if it has good electromagnetic resistance.

Flammable and explosive materials not only cause complete damage to sensors, but also pose a great threat to other equipment and personal safety. Therefore, sensors working in flammable and explosive environments have higher requirements for explosion-proof performance: explosion-proof sensors must be selected in flammable and explosive environments, and the sealing cover of such sensors should not only consider their airtightness, but also their explosion-proof strength, as well as the waterproof, moisture-proof, and explosion-proof properties of cable leads.