Diesel Engine Parts Cumminss Hexagon Flange Bolts 3627095 For K50 Engine Use

Desc.

Hexagon Flange Bolts

Part No

3627095

Brand Name  

Cummins, Detroit, DCEC, CCEC, XCEC etc.

Other parts

pls contact freely if you need other P/N

Engine Type

Diesel engine, Gas engine, Diesel Generator, Marine engine, Construction engine Pump engine etc.

Spare Type

Wearing spare parts, maintenance tools, repair kit, upper and lower engine gasket kit.

Condition:

Original and brand new

Applicatble industriy

Retail, marine engines, Construction works, Energy & Mining etc

Key Word:  

Original spare parts and engine repair tool kits

Trade terms

FOB EXW CIF DDU DDP,

Door to door is available in some countries.

Delivery time:

Most parts are in stock, bulk order based on qty

Payment

T/T, L/C, D/A, Alipay, Western Union, Paypal etc.

Place of origin

China/ USA/ Japan/ Austria/ Mexico

Package

Neutral or original packaging

About the product

Hexagonal flange bolts are fasteners composed of hexagonal heads, flanges, and screws.

Performance level

Performance level classification of flange bolts for steel structure connections

There are more than 10 levels including 3.6, 4.6, 4.8, 5.6, 6.8, 8.8, 9.8, 10.9, 12.9, among which level 8.8

The material of the bolts and above is low-carbon alloy steel or medium carbon steel and has undergone heat treatment (quenching, tempering), commonly known as high-strength bolts, while others are commonly referred to as ordinary bolts

Bolt. The bolt performance grade number consists of two parts of numbers, which respectively represent the nominal tensile strength value and yield strength ratio of the bolt material benefit

Ordinary bolt heads are very thick and difficult to deform. If vibration occurs after installation, they need to be re tightened; The flange has a thin part that can deform slightly and lock more firmly, right. Another thing is that when going up into the hole, ordinary bolts cannot be used with tools. The head of the flange bolt is smaller, and the lower flange plate still plays a fastening role, but it can be used with special tools to go up into the hole, similar to the principle of hexagonal bolts. Another option is to use flange top flat pads, which are safer on softer and less wear-resistant materials and will not cause perforation