Engineering Machinery Accessories Fuel Supply Tube 2896833
Chongqing Kyson Machinery Equipment Co., Ltd. is one of the leading manufacturers and suppliers of engineering machinery accessories fuel supply tube 2896833 in China. With abundant experience, our factory offer high quality products made in China with competitive price. Welcome to place an order.
Products Description
Technical Specification & Payment and Trade Terms & Delivery and Packaging
|
Desc. |
Fuel Manifold |
Part No |
4927495 2896833 |
|
Brand Name |
Cummins, Detroit, DCEC, CCEC, XCEC etc. |
Other parts |
pls contact freely if you need other P/N |
|
Engine Type |
Diesel engine, Gas engine, Diesel Generator, Marine engine, Construction engine, Pump engine etc. |
Spare Type |
Wearing spare parts, maintenance tools, |
|
Condition: |
Original and brand new |
Applicatble industriy |
Retail, marine engines, Construction works, Energy & Mining etc |
|
Key Word: |
Original spare parts and engine repair tool kits |
Trade terms |
FOB EXW CIF DDU DDP, Door to door is available in some countries. |
|
Delivery time: |
Most parts are in stock, bulk order based on qty |
Payment |
T/T, L/C, D/A, Alipay, Western Union, Paypal etc. |
|
Place of origin |
China/USA/Japan/Austria/Mexico |
Package |
Neutral or original packaging |
|
Engine model |
G50, QSK50 CM2150 K107, KP50-DPM, K50, QSK50 CM2150 MCRS, QSK50 CM2350 K108, QSK50 CM850 K38, QSK38 CM2150 MCRS, QSK38 CM850 MCRS, G38, KTA38GC CM558, QSK38 CM2150 K106 |
||
Design advantages
The design of gas manifolds is also very knowledgeable. In order to ensure that the combustion conditions of each cylinder of the engine are the same, the length and curvature of the manifold in each cylinder should be as consistent as possible. Due to the fact that the engine operates through four strokes, each cylinder of the engine will intake air in a pulse manner. Based on experience, longer manifolds are suitable for low speed operation, while shorter manifolds are suitable for high speed operation. So some car models will use variable length intake manifolds or continuously variable length intake manifolds to enable the engine to perform better in various speed ranges.
Superiority
The main advantage of plastic intake manifolds is their lower cost and lighter weight. In addition, due to the lower thermal conductivity of PA compared to aluminum, the fuel nozzle and incoming air temperature are lower. Not only can it improve hot start performance, increase engine power and torque, but it can also to some extent avoid heat loss in the pipes during cold start, accelerate the increase of gas temperature, and the smooth inner wall of the plastic intake manifold can reduce air flow resistance, thereby improving engine performance.
In terms of cost, the material cost of plastic intake manifold is basically the same as that of aluminum intake manifold, and the plastic intake manifold is formed in one go, with a high qualification rate; The casting yield of aluminum intake manifold blanks is low, and the machining cost is also relatively high. Therefore, the production cost of plastic intake manifold can be reduced by 20% -35% compared to aluminum intake manifold.
The main advantage of plastic intake manifolds is their lower cost and lighter weight. In addition, due to the lower thermal conductivity of PA compared to aluminum, the fuel nozzle and incoming air temperature are lower. Not only can it improve hot start performance, increase engine power and torque, but it can also to some extent avoid heat loss in the pipes during cold start, accelerate the increase of gas temperature, and the smooth inner wall of the plastic intake manifold can reduce air flow resistance, thereby improving engine performance.
In terms of cost, the material cost of plastic intake manifold is basically the same as that of aluminum intake manifold, and the plastic intake manifold is formed in one go, with a high qualification rate; The casting yield of aluminum intake manifold blanks is low, and the machining cost is also relatively high. Therefore, the production cost of plastic intake manifold can be reduced by 20% -35% compared to aluminum intake manifold.
Requirements for plastic materials for engine gas manifolds
1) High temperature resistance: The plastic intake manifold is directly connected to the engine cylinder head, and the temperature of the engine cylinder head can reach 130~150 ℃. Therefore, it is required that the plastic intake manifold material can withstand a high temperature of 180 ℃.
2) High strength: The plastic manifold installed on the engine must withstand the vibration load of the car engine, inertia force load of the throttle valve and sensor, intake pressure pulsation load, etc., and ensure that it is not burst by high-pressure pulsation pressure when the engine experiences abnormal tempering.
3) Dimensional stability: The connection dimension tolerance between the intake manifold and the engine is very strict, and the installation of various sensors, actuators, etc. on the manifold must also be accurate.
4) Chemical stability: Plastic intake manifolds come into direct contact with gasoline and antifreeze coolant during operation. Gasoline is a strong solvent, and ethylene glycol in the coolant can also affect the properties of plastics. Therefore, plastic intake manifold materials require high chemical stability and require strict testing.
5) Thermal aging stability; The car engine operates in very harsh environmental temperatures, with operating temperatures fluctuating back and forth between 30 and 130 ℃. The plastic material must ensure the long-term reliability of the manifold

Transportation

Hot Tags: engineering machinery accessories fuel supply tube 2896833, China, factory, price, in stock, made in China
Send Inquiry


