Injector Cup 3406605 For Cummins Diesel Engine M11 Replacement Parts Diesel Generator Set Spare Parts
Part No: 3406605
Brand Name: Cummins, Detroit, DCEC, CCEC, XCEC etc.
Other parts: pls contact freelyif you need other P/N
Send Inquiry
Product Details ofInjector Cup 3406605 For Cummins Diesel Engine M11 Replacement Parts Diesel Generator Set Spare Parts
Chongqing Kyson Machinery Equipment Co., Ltd. is one of the leading manufacturers and suppliers of injector cup 3406605 for cummins diesel engine m11 replacement parts diesel generator set spare parts in China. With abundant experience, our factory offer high quality products made in China with competitive price. Welcome to place an order.
Description
Technical Specification & Payment and Trade Terms & Delivery and Packaging
|
Desc. |
Cup Injector |
Part No |
3406605 |
|
Brand Name |
Cummins, Detroit, DCEC, CCEC, XCEC etc. |
Other parts |
pls contact freely if you need other P/N |
|
Engine Type |
Diesel engine, Gas engine, Diesel Generator, Marine engine, Construction engine Pump engine etc. |
Spare Type |
Wearing spare parts, maintenance tools, repair kit, upper and lower engine gasket kit. |
|
Condition: |
Original and brand new |
Applicatble industriy |
Retail, marine engines, Construction works, Energy & Mining etc |
|
Key Word: |
Original spare parts and engine repair tool kits |
Trade terms |
FOB EXW CIF DDU DDP, Door to door is available in some countries. |
|
Delivery time: |
Most parts are in stock, bulk order based on qty |
Payment |
T/T, L/C, D/A, Alipay, Western Union, Paypal etc. |
|
Place of origin |
China/ USA/ Japan/ Austria/ Mexico |
Package |
Neutral or original packaging |
| Product Introduction | Troubleshooting Spray hole blockage A needle can be used for unblocking, and after unblocking, it should be carefully cleaned. Poor contact between the large plane of the needle valve body and the main plane of the fuel injector, or significant wear on the cylindrical surface of the needle valve. If the contact between the large surface of the needle valve body and the main surface of the fuel injector is poor, chromium oxide can be applied to the flat plate for an "8" - shaped grinding; If there is significant wear on the cylindrical surface of the needle valve, the needle valve components should be replaced in pairs. Poor sealing Poor sealing of the needle valve and needle valve body causes poor atomization or oil dripping of the fuel injector. This type of malfunction can be achieved by applying fine chromium oxide or toothpaste to the sealing strip at the end of the needle valve, but do not apply it to the cylindrical part. Then insert the needle valve into the valve body and rotate it while tapping until it fits tightly. After grinding, chromium oxide or toothpaste must be washed away. Air present There is air in the oil circuit. Just remove the air from the oil circuit. Poor fuel supply The oil pump needs to be repaired. If there is a leak in the oil pipeline joint, try to connect it properly to prevent it from leaking. Insufficient elasticity Insufficient elasticity of piston spring or spring breakage. The spring should be replaced. |
||
More and other spare parts are available to supply, the page is limited and we cannot write all the parts on it. If you need anything else, please contact us for quotation, pls click here for Online consultation if you did not find what you need on our website.
Hot Tags: injector cup 3406605 for cummins diesel engine m11 replacement parts diesel generator set spare parts, China, factory, price, in stock, made in China, cummins QSK19 Thermo Switch, Cummins Diesel Motor Spare Parts, fuel pump body, cummins X15 spare, Fuel Shutoff Solenoid, cummins CM558
Send Inquiry
