The Maritime Safety Administration of the Ministry of Transport has launched a special action to prevent ship mechanical and electrical equipment failures nationwide since April 7, 2024,focusing on reducing the risk of ship mechanical and electrical equipment failures and preventing and curbing the occurrence of water traffic accidents.
Some of the cases in the special action are representative and worth learning from.
Next, let's learn about two related cases and analyze the hidden dangers of the same type of main engine power system exposed by the cases. We hope to raise the awareness and attention of the company and ships, draw lessons from each other, and strengthen self inspection and correction.
1. Main power system(Main propulsion engine ) malfunction
In January 2024, during the departure of a large bulk carrier "N" from port, a sudden engine failure occurred on the inner side of the harbor, causing the ship to lose power, drift, and have a risk of collision lights floating. The pilot immediately reported to the maritime department. The local maritime authorities immediately activated emergency response measures and used tugboat towing to fix the ship's position. After the ship was temporarily repaired and restored to power, it was safely moved to the anchorage for anchoring and maintenance under the escort of tugboats.
After inspection by the port state supervision, it was found that the electromagnetic sensor fixing devices of the three reversing cylinders 4, 5, and 6 of the ship's main engine were loose and detached. During the main engine's reversing operation, the control system could not receive the calibration electromagnetic signal feedback from the reversing cylinders, resulting in the main engine ignition failure and loss of power to the ship.
2.Similar Main power system issue discovered during port state supervision and inspection
In April 2024, the maritime department, in conjunction with port state supervision and inspection, carried out a special inspection on the prevention of mechanical and electrical equipment failures of a bulk carrier "L". The model of the main engine of this round is the same as that of the "N" wheel. Based on the inspection experience of the "N" wheel, law enforcement personnel conducted a preventive inspection on the remote control reversing system of the main engine of this round. It was found that the induction solenoid valve buckle of the steering cylinder of the fourth cylinder of the main engine of this round was loose, and there was a risk of the induction solenoid valve falling off.

Law enforcement officers promptly reported the defects to the responsible crew members and conducted case publicity and education, requiring thorough repairs and testing before sailing to ensure that the main engine of the ship remains in good condition during departure and navigation.
Hidden dangers of similar ships exposed by related cases: main power systems
The main engine models of N and L ships are both MAN B&W 6S70MC, which is different from the current popular ME electronic fuel injection engine, MC engine is a traditional diesel engine that uses camshaft/cam transmission for timing control. It is widely used in some older ships. This type of engine adjusts the camshaft through a reversing cylinder to control the forward and reverse operations of the ship.
In order to prevent the main engine from starting when the camshaft is not in place (which may cause damage to the machine), this type of main engine is equipped with an electromagnetic sensor on the steering cylinder block. However, the installation position of the reversing cylinder and the matching electromagnetic sensor is relatively concealed, and the malfunction of the electromagnetic sensor cannot be displayed separately on the main control panel. Crew members are prone to ignoring it during daily inspections and maintenance.
When the buckle of the induction solenoid valve in the steering cylinder becomes loose or detached, it is not easy to be detected. However, the detachment of the induction solenoid valve can cause the control system to not receive the calibration electromagnetic signal feedback from the reversing cylinder when the host is reversing, resulting in ignition failure and parking of the host.