Swirl ratio, simply put, is the swirling motion of the intake air around the cylinder's central axis within the cylinder. The formula is: swirl velocity / engine speed.
The traditional benefits of high swirl ratio are:
1.Promoting the mixture of oil and gas: The intense swirl can help the fuel vapor and air mix rapidly, forming a more uniform combustible mixture.
2. Accelerate combustion: Make the flame spread faster, burn more thoroughly, and enhance power performance and economy.
3. Reduce soot: More uniform mixing reduces local oil-rich areas, thereby suppressing soot formation.
I. Core Reasons for Selecting Low Turbulence Ratio in the National VI Stage
The National VI regulations impose extremely strict limits on NOx and PM. To simultaneously overcome these two major challenges, the technical approach has undergone a fundamental change.
Core contradiction: EGR must be used to suppress NOx.
EGR is one of the most effective means to reduce NOx. It reintroduces exhaust gas into the cylinder, reducing the O2 concentration inside the cylinder and lowering the peak combustion temperature, thereby suppressing the generation of NOx at the source.
The conflict between high swirl and EGR:
The high-turbulence design is intended to rapidly mix fresh air and fuel. However, when a large amount of EGR exhaust gas (inert gas) is introduced, these gases will seriously interfere with the intensity of the swirl inside the cylinder. The originally designed high-turbulence field will be disrupted, leading to unstable combustion and a significant reduction in performance.
Solution: Low swirl ratio
The combustion system with a low swirl ratio has a higher tolerance for exhaust gas by itself. It creates a calmer combustion environment, allowing a high proportion of EGR exhaust gas to coexist smoothly with fresh air and fuel, thus ensuring combustion stability at a high EGR rate.
Technical Support: A Leap in Fuel Injection Systems
Most of the diesel engines that meet the National VI emission standards have adopted common rail injection systems with pressures above 2000 bar, and some even reach as high as 2500 bar.
High-pressure jetting has replaced some of the functions of the vortex.
The extremely high injection pressure ensures good atomization of the fuel and very small droplet sizes. This gives the fuel itself extremely strong penetration and evaporation mixing capabilities, and it no longer relies heavily on the air swirl inside the cylinder to help with the stirring as it did before.
Excessively strong swirls may instead blow fine oil droplets onto the cold cylinder walls, causing "wet walls", which leads to oil dilution and an increase in unburned hydrocarbon emissions.

Ⅱ.reduce pumping loss and enhance thermal efficiency.
Lower swirl intensity means that the air encounters less resistance when entering the cylinder, thereby reducing pumping loss. This is an effective way to improve the thermal efficiency of the engine (save fuel). In the National VI stage, fuel economy remains a core indicator.
III. Disadvantages of Low swirl ratio
1. Poor mixture of air and oil in the cylinder, prone to carbon formation, requiring a more powerful DPF to handle it.
2. Poor air-fuel mixture leads to high fuel consumption, but if the engine's pumping loss can be effectively reduced, it may not necessarily result in high fuel consumption.
3. Poor combustion, resulting in poor transient power performance.
Conclusion
To meet the NOX and PM regulations and prioritize fuel economy, which is the most important factor for customers, the swirl ratio of diesel engines for National VI standards has been reduced. The post-treatment route for National V standards is SCR, while for National VI standards, the auxiliary post-treatment route is DOC + DPF + SCR + ASC.
A brief introduction to the hardware that affects swirl ratio:
W-shaped piston bowl
Intake port of cylinder head
Valves
Intake manifold
Swirl control valve
