Marine Engine Water Pump 3051408 3022474 For Nta855 Diesel Engine Spare Parts.

Desc.

Water Pump

Part No

3051408 3022474

Brand Name  

Cummins, Detroit, DCEC, CCEC, XCEC etc.

Other parts

pls contact freely if you need other P/N

Engine Type

Diesel engine, Gas engine, Diesel Generator, Marine engine, Construction engine Pump engine etc.

Spare Type

Wearing spare parts, maintenance tools, repair kit, upper and lower engine gasket kit.

Condition:

Original and brand new

Applicatble industriy

Retail, marine engines, Construction works, Energy & Mining etc

Key Word:  

Original spare parts and engine repair tool kits

Trade terms

FOB EXW CIF DDU DDP, Door to door is available in some countries.

Delivery time:

Most parts are in stock, bulk order based on qty

Payment

T/T, L/C, D/A, Alipay, Western Union, Paypal etc.

Place of origin

China/USA/Japan/Austria/Mexico

Package

Neutral or original packaging

Installation method

1. Under geographical conditions, the water pump should be as close as possible to the water source to reduce the length of the suction pipe. The foundation at the installation site of the water pump should be firm, and a dedicated foundation should be built for fixed pump stations.

2. The inlet pipeline should be sealed reliably and must have dedicated support. It cannot be hung on the water pump. The inlet pipe equipped with a bottom valve should be installed as vertically as possible with the axis of the bottom valve perpendicular to the horizontal plane, and the angle between the axis and the horizontal plane should not be less than 45 °. When the water source is a channel, the bottom valve should be at least 0.50 meters above the bottom of the water, and a mesh should be added to prevent debris from entering the pump.

3. The base of the machine and pump should be horizontal and firmly connected to the foundation. When the machine and pump are driven by a belt, the tight edge of the belt should be downward, so the transmission efficiency is high. The rotation of the water pump impeller should be consistent with the direction indicated by the arrow; When using coupling transmission, the machine and pump must be coaxial.

4. The installation position of the water pump should meet the requirement of allowing for vacuum suction height, and the foundation must be horizontal and stable to ensure that the rotation direction of the power machinery is consistent with the rotation direction of the water pump.

If there are multiple units in the same computer room, there should be a distance of at least 800mm between units and between units and walls.

6. The water pump suction pipe must be well sealed and minimize bends and gate valves. When adding water, the air should be discharged completely. During operation, there should be no accumulation of air in the pipe. The suction pipe should be slightly inclined upwards and connected to the water pump inlet, and the inlet should have a certain submergence depth.