Cummins Kta Generator Cummins Water Alternater Belt 3031485

Desc.

Alternater Belt

Part No

3031485

Brand Name

Cummins, Detroit, DCEC, CCEC, XCEC etc.

Other parts

pls contact freely if you need other P/N

Engine Type

Diesel engine,Gas engine, Diesel Generator, Marine engine, Construction engine, Pump engine etc.

Spare Type

Wearing spare parts, maintenance tools, repair kit, upper and lower engine gasket kit.

Condition:

Original and brand new

Applicatble industriy

Retail, marine engines, Construction works, Energy & Mining etc

Key Word:

Original spare parts and engine repair tool kits

Trade terms

FOB EXW CIF DDU DDP, Door to door is available in some countries.

Delivery time:

Most parts are in stock,bulk order based on qty

Payment

T/T, L/C, D/A, Alipay, Western Union, Paypal etc.

Place of origin

China/USA/Japan/Austria/Mexico

Package

Neutral or original packaging

About the product

The main function of the pulley of an AC generator is to transmit power, drive the rotor of the generator to rotate, cut magnetic induction lines, and thus generate electricity. Due to its high frequency of use, the pulley is prone to damage and usually needs to be replaced after driving for about 60000 to 80000 kilometers. In rare cases, it can be replaced after driving for 80000 to 100000 kilometers.

The specific functions of the pulley in the generator include:

Transmission of power: The power of the engine is transmitted to the generator through a belt, causing it to rotate and cut magnetic induction lines, thereby generating electricity.

Relieve impact: During sudden acceleration and deceleration of the vehicle, the pulley can alleviate the impact of the generator, reduce the load on the engine and gearbox, extend the service life of the belt, and reduce engine vibration and noise.

To ensure the normal operation of the generator belt, car owners should regularly perform the following maintenance:

Adjust belt tension: After driving a certain distance, check and adjust the tension of the generator belt appropriately, and tighten the adjustment screws if necessary.

Check bearings and rectifiers: Regularly inspect the wear of bearings and the cleanliness of rectifiers, and if necessary, add oil drops or clean them.

Replace worn parts: If the spring elasticity weakens or the electric brush is severely worn, new parts need to be replaced in a timely manner; If the length of the electric brush is insufficient but there is no damage, a shim can be added to the bracket.

Through these maintenance measures, the normal operation of the generator belt can be ensured, its service life can be extended, and the stable operation of the generator can be guaranteed.