Kta19 Washer Plain 205128 Diesel Engine Parts

Desc.

Washer

Part No

205128

Brand Name

Cummins, Detroit, DCEC, CCEC, XCEC etc.

Other parts

pls contact freely if you need other P/N

Engine Type

Diesel engine, Gas engine, Diesel Generator, Marine engine, Construction engine Pump engine etc.

Spare Type

Wearing spare parts, maintenance tools, repair kit, upper and lower engine gasket kit.

Condition:

Original and brand new

Applicatble industriy

Retail, marine engines, Construction works , Energy & Mining etc

Key Word:  

Original spare parts and engine repair tool kits

Trade terms

FOB EXW CIF DDU DDP,

Door to door is available in some countries.

Delivery time:

Most parts are in stock, bulk order based on qty

Payment

T/T, L/C, D/A, Alipay, Western Union, Paypal etc.

Place of origin

China/ USA/ Japan/ Austria/ Mexico

Package

Neutral or original packaging

About the product

The bolt washer has two main functions: one is to increase the contact area between the bolt and the surface of the part to prevent the surface of the part from being worn out; The second is to play the role of anti-loosening.

These two functions basically correspond to two categories of washers: flat washers and spring washers.

The function of the flat washer is to protect the surface of the connector from scratches, and it is used in the following cases:

1. Occasions where bolts need to be disassembled frequently;

2. The bolt strength is high, and the compressive stress of the connected part is relatively low. Increasing the flat washer can reduce the compressive stress of the bearing surface of the connected part;

3. In some cases, in order to ensure that the bolt holes between the two connectors can correspond one by one, we need to increase the diameter of the holes to compensate for the position deviation of the holes, and it is necessary to increase the flat washer when the bolt holes exceed the standard requirements.

4. Sometimes in order to facilitate installation and adjustment, the bolt hole will be made into a long hole, so that the installation position of the workpiece can be adjusted within a certain range, when using a long hole, it is necessary to use a thick flat washer, or even a special washer or multiple washers.