+86-15123173615

Disposal and prevention plan for the problem of high temperature of main bearings in marine diesel engines

Oct 21, 2024

Introduction

The power system is likened to the heart of a ship. For diesel powered ships (currently, over 90% of ship power is diesel powered), the diesel engine is the core component, so ensuring the safe and reliable operation of the diesel engine is particularly important.

 

In recent years, there have been frequent occurrences of sudden failures in the main bearings (sliding bearings) of marine diesel engines, mainly manifested by excessively high temperatures in the main bearings. If not handled in a timely and correct manner, it is highly likely to cause tile burning, abnormal noise, and even serious malfunctions such as cylinder ramming, crankshaft and machine damage. These faults can cause a decrease in diesel engine power and increased wear, and in severe cases, may lead to the scrapping of the diesel engine.

 

The manifestations of high temperature in the main bearings of marine diesel engines are diverse, and their degree of harm also varies. It is necessary to quickly and accurately identify and address these issues in order to maximize the performance of the equipment. Meanwhile, these analyses can also encourage us to continuously explore new methods and approaches in the proper use and maintenance of diesel engines.

 

 

info-400-225

 

1, Mechanism analysis of high temperature of diesel engine main bearings

The main reasons for the high temperature of the main bearing are reflected in two aspects: internal and external. The internal cause is the excessive heat generated by the main bearing itself, while the external cause is poor cooling and heat dissipation or an increase in external heat.

 

1. Excessive self heat generation

The main reason for excessive heat generation is that the main bearing generates excessive heat due to abnormal friction, which is mainly caused by excessive load or improper lubrication. In daily use, the load can usually be manually adjusted (ensuring it is within the rated load range). This article will focus on analyzing improper lubrication.

 

The key to ensuring good lubrication of bearings lies in whether the lubricating oil layer can maintain sufficient thickness, and the thickness of the lubricating oil layer is determined by multiple factors. In the case of sufficient supply of lubricating oil in the bearing, the thickness of the lubricating oil layer is closely related to the lubricating oil pressure in the bearing and the load on the bearing, and the lubricating oil pressure in the bearing is also affected by the bearing speed and lubricating oil viscosity. Therefore, the rotational speed of the shaft, the viscosity of the lubricating oil, the bearing load, and the bearing clearance will directly or indirectly affect the thickness of the lubricating oil layer.

 

(1) The rotational speed of the shaft

在轴承负荷保持不变的条件下,随着轴的转速增大,轴从间隙较大区域挤压向狭窄区域的滑油增多,滑油受到的挤压加剧,压力增大,导致滑油向上抬起,轴的总作用力超过轴承负荷,使轴向上移动,因此滑油层厚度增加.

Under the condition of keeping the bearing load constant, as the shaft speed increases, the amount of lubricating oil squeezed from the area with large clearance to the narrow area increases. The compression on the lubricating oil intensifies, and the pressure increases, causing the lubricating oil to lift upwards. The total force on the shaft exceeds the bearing load, causing axial movement and thus increasing the thickness of the lubricating oil layer.

 

(2) Oil viscosity

滑油粘度的大小直接影响到滑油受挤压的程度.当粘度减小时,滑油受挤压的程度减小,油层的压力降低,而且滑油更容易从轴承的两端流出.因此,在轴承负荷保持不变的情况下,轴会向下移动,滑油层的厚度减小.如果粘度过小,滑油层的厚度将不足以保证机件表面完全分离,从而破坏润滑效果.

The viscosity of lubricating oil directly affects the degree of compression of the oil. When the viscosity decreases, the degree of compression of the lubricating oil decreases, the pressure of the oil layer decreases, and the lubricating oil is more likely to flow out from both ends of the bearing. Therefore, when the bearing load remains constant, the shaft will move downward and the thickness of the lubricating oil layer will decrease. If the viscosity is too low, the thickness of the lubricating oil layer will not be sufficient to ensure complete separation of the machine surface, thereby damaging the lubrication effect.

 

(3) Bearing load

当轴承负荷增大时,轴会向下移动,导致滑油层厚度减小,因此滑油受到的挤压加剧,滑油层的压力增大.当作用在轴上的滑油总压力与轴承上的负荷相等时,轴会稳定下来.

When the bearing load increases, the shaft will move downward, resulting in a decrease in the thickness of the lubricating oil layer. Therefore, the compression on the lubricating oil layer intensifies, and the pressure on the lubricating oil layer increases. When the total pressure of the lubricating oil acting on the shaft is equal to the load on the bearings, the shaft will stabilize.

 

(4) Bearing clearance

轴承间隙过大时,滑油容易流失,导致油膜难以建立.此外,内燃机工作时,轴的冲击力也较大,容易破坏滑油层.

When the bearing clearance is too large, the lubricating oil is prone to loss, making it difficult to establish an oil film. In addition, during the operation of internal combustion engines, the impact force on the shaft is also significant, which can easily damage the lubricating oil layer.

 

2. Poor external cooling effect

The main reasons for poor cooling effect of bearings include two aspects: cooling system failure and lubrication system failure.If there is a water pump failure, system pipeline failure, thermostat failure, seawater system failure, or improper operation by relevant personnel in the cooling system, it will lead to insufficient or low water level in the cooling system (including the radiator or cooling water tank), resulting in poor cooling efficiency.

In addition, if the lubrication system experiences insufficient circulation of lubricating oil, failure of the lubricating oil cooler, or failure of the lubricating oil pump, it can also cause the lubricating oil temperature of the diesel engine to be too high or the oil passage to be blocked, thereby preventing effective cooling of the main bearings.

 

3. External additional heat increases

The most typical problem is excessive cylinder leakage. If the piston and cylinder liner are severely worn, or if the piston ring is stuck or broken, it can cause excessive high-temperature gas leakage into the crankcase. This not only leads to excessive oil temperature, making the oil more prone to gel and deteriorate, but also increases the temperature of the main bearing. During inspection, the ventilation hole of the crankcase should be opened to observe the blow by situation of the crankcase. If serious abnormalities are found, the piston connecting rod assembly should be disassembled and the fit clearance between the piston and the cylinder liner should be checked. If the clearance exceeds the specified range, the corresponding components should be replaced in a timely manner.

 

 

info-400-480

 

2, Additional fault characteristic analysis, disposal, and elimination

Once the fault of high temperature in the main bearing of a diesel engine occurs, if not handled properly or delayed, it will cause significant and irreversible damage to the diesel engine. Early detection, early disposal, and early resolution are key. If the following phenomena occur during the operation of a diesel engine, it is an important manifestation of high main bearing temperature. These phenomena are highly likely to cause major faults in the main bearings. Once discovered, if conditions permit, the machine should be stopped immediately for inspection and troubleshooting.

 

1. The temperature of the lubricating oil is too high

Hazard analysis: Excessive oil temperature leads to a rapid decrease in oil viscosity and a decrease in oil pressure. This will make it easy for lubricating oil to flow out from the clearance between the parts, which is not conducive to the formation of oil film and lubrication effect, leading to increased wear of the parts and a sudden increase in heat generation. At the same time, the consumption of lubricating oil will also significantly increase, which can easily cause serious faults in diesel engines.

Disposal measures: Report immediately while handling quickly. The disposal method is to first reduce the speed and load, while observing the temperature changes. If the temperature drops and stabilizes within a reasonable range, wait for instructions from superiors before stopping the machine for inspection; If the temperature does not decrease or still exceeds a reasonable range after decreasing, the backup diesel engine should be immediately activated and the faulty diesel engine should be stopped, while strengthening the management of other working diesel engines.

Analysis and elimination: Conducting in-depth analysis from both internal and external factors to identify the cause of the malfunction is the key to solving the problem, which can then be resolved through maintenance or repair.

 

The main reasons are analyzed as follows:

(1) Insufficient circulating oil volume. Check the oil level in the diesel oil pan or daily oil tank. If the oil level is too low, the circulating oil volume will not be sufficient to meet the demand, resulting in an increase in the number of cycles of the lubricating oil per unit time, insufficient heat dissipation, and an increase in temperature. At this point, lubricating oil should be added promptly.

(2) The temperature of the cooling water is high. The lubricating oil is cooled by cooling water. If the temperature of the cooling water is too high or the amount of water flowing through the lubricating oil cooler is too low, the lubricating oil cannot be fully cooled in the cooler, and the temperature will rise. Therefore, the working status of the cooling system should be checked to ensure its normal operation.

(3) The cooling effect of the oil cooler is poor. After long-term use, the internal oil passages of the oil cooler may be blocked by debris such as gum (sludge) and carbon deposits. At the same time, thick scale may form on the walls of the water channels (or pipes) inside the cooler, causing the channels to narrow or even block, affecting the flow and heat transfer of the cooling water, thereby reducing the cooling performance of the oil cooler. Another situation is that if the partition in the oil cooler is welded off and leaks oil, the oil will flow out from the outlet without sufficient cooling, resulting in high oil temperature. In response to the above fault causes, the cooler should be disassembled, inspected, and cleaned in a timely manner. During normal use, the lubricating oil cooler should be regularly disassembled and cleaned according to the requirements of the diesel engine manual to prevent malfunctions.

(4) The oil temperature gauge does not indicate accurately. If the oil temperature gauge indicates inaccurately, it may lead to misjudging that the oil temperature is too high. When checking, you can touch the oil outlet pipe (or the oil inlet pipe of the oil cooler) with your hand and compare the temperature with the temperature value indicated on the temperature gauge to determine whether the oil temperature gauge is accurate. In addition, when the diesel engine is in a cold state, check the oil temperature pointer, which should indicate a value similar to the air temperature (ambient temperature). Otherwise, the temperature gauge is inaccurate and needs to be replaced in a timely manner.

(5) Excessive air leakage in the cylinder. In addition to problems with the lubrication and cooling systems, if the piston and cylinder liner are severely worn or the piston ring is stuck or broken, it may cause a large amount of high-temperature gas to leak into the crankcase, causing an increase in the temperature of the lubricating oil and potentially leading to problems such as oil sticking and deterioration. During inspection, the crankcase vent can be opened to observe the blow by situation in the crankcase. If the abnormality is severe, the piston connecting rod assembly should be disassembled, and the fit clearance between the piston and the cylinder liner should be checked. If it exceeds the tolerance, it should be replaced. During the maintenance of the suspended cylinder, the piston rings should generally be replaced at the same time.

 

2. Low or no oil pressure

Hazard analysis: Low or no oil pressure can result in insufficient lubrication of the friction surface.Mild cases can exacerbate wear and tear, while severe cases may cause serious malfunctions such as mechanical jamming, burning of tiles and shafts, and even complete machine scrapping.

Disposal measures: Once abnormal oil pressure is detected, the vehicle should be stopped immediately and reported promptly. The specific disposal method is to immediately stop the vehicle and simultaneously start the backup oil pump, seawater pump, and freshwater pump for turning operation. At the same time, quickly activate the backup diesel engine and strengthen the monitoring and management of diesel engines in other operations.

Analysis and elimination: To identify the specific cause of the malfunction and solve it through maintenance or repair.

 

The main reasons may include:

(1) Insufficient oil storage in the oil tank or oil pan. When the oil storage is insufficient, the amount of oil sucked in and pumped out by the oil pump decreases, resulting in a decrease in oil pressure. This situation can be observed from the reading of the oil pressure gauge. If the oil pressure gauge indicates normal when starting, but then quickly drops to near zero, it may be due to insufficient oil. Possible reasons include insufficient refueling, oil leakage in the oil circuit, or the presence of burning lubricating oil.

(2) The lubricating oil is too thin. When the lubricating oil is too thin, it is difficult for the friction surfaces of each component to form an effective oil film, resulting in poor lubrication and a decrease in oil pressure.

(3) The lubricating oil filter is dirty and clogged. The lubricating oil filter of the diesel engine should be disassembled and cleaned every 200-300 hours of operation. If not cleaned for a long time, the filter may become clogged, resulting in poor oil flow, reduced flow rate, and decreased oil pressure.

(4) Pressure regulating valve malfunction. Poor closure of the pressure regulating valve of the oil pump, low adjustment pressure of the pressure regulating spring, or permanent deformation or crescent bending of the pressure regulating spring can all reduce the preload force of the spring, causing some oil to flow back to the oil pan, thereby reducing the oil pressure. The pressure regulating valve should be adjusted on the diesel engine and in a hot state. Adjust according to the specified oil pressure value at the calibrated speed.

(5) Oil pump malfunction. Diesel engine oil pumps are mostly gear pumps. After long-term operation, the wear of the main and driven gears can lead to an increase in backlash; The wear between the gear end face and the pump cover, as well as between the gear tip and the pump casing, can also reduce the pump oil pressure (i.e. outlet pressure). If the transmission gear of the oil pump falls off, is damaged, or the transmission key is cut off, the oil pump will not be able to pump oil. The oil pressure will suddenly drop to zero, causing the diesel engine to lose lubrication. At this time, the machine must be stopped immediately to avoid damage to the bearing, crankshaft and other components.

(6) The surface clearance of lubricating parts is large. After long-term operation of diesel engines, the wear of relative moving parts will increase the fit clearance, especially the excessive fit clearance between main moving parts such as main bearings and main shaft bearings, connecting rod bearings and bearing shells, which will cause a large amount of lubricating oil to flow back to the oil pan from the clearance, thereby reducing the lubricating oil pressure.

 

3. There is a heavy knocking sound in the crankcase

Hazard analysis: When there is a heavy knocking sound in the crankcase of a diesel engine, it is usually caused by faults such as excessive clearance between the main bearing or connecting rod bearing, or loose fasteners. In this case, the lubrication environment of the bearing will deteriorate sharply, and the heat generated by friction will also significantly increase. If not dealt with in a timely manner, it may worsen the wear or damage of the components, and in severe cases, it may cause accidental damage to the entire machine.

 

Disposal measures: Once an abnormal knocking sound is heard, the vehicle should be stopped immediately and quickly reported. Start the backup oil pump, seawater pump, and fresh water pump, and perform turning operation. Before identifying the cause of the malfunction and troubleshooting it, the diesel engine cannot be started arbitrarily. At the same time, the backup diesel engine should be quickly activated and the management of other working diesel engines should be strengthened.

 

Analysis and exclusion: To check for abnormal sounds, a diesel engine specific stethoscope can be used. If conditions do not allow, a simple method can also be used, which is to use a metal rod (or screwdriver) about 0.5 meters long, sharpen one end of the metal rod and tightly adhere it to the surface of the inspection part of the diesel engine. The other end is made into a round head shape and attached to the examiner's ear hole, so that abnormal sounds can be heard more clearly.

 

When inspecting, attention should be paid to comparing the sounds of each cylinder. Firstly, determine which cylinder the abnormal sound comes from, and then analyze and judge the faulty component based on the level, severity, strength of the sound adjustment, as well as its variation with diesel engine speed, temperature, load, etc. The knocking sound of the main bearing is usually a low and heavy, powerful "when, when" sound.

 

Its characteristic is that the higher the speed of the diesel engine, the louder the sound. When there is a load or a large load, the sound is more obvious, and the sound does not change with the temperature of the diesel engine. When the noise is severe, the vibration of the diesel engine will intensify and there may be oscillation, while the lubricating oil pressure will also decrease significantly.

 

Possible causes of the malfunction include loose main bearing screws, erosion or peeling of the main bearing shell alloy layer, severe wear of the bearing or journal, and excessive fit clearance. When it is diagnosed that there is a knocking sound in the main bearing, the oil pan and the possibly faulty main bearing cover should be removed after stopping the machine. Check the wear of the main bearing pad. If the alloy layer of the bearing shell is burned or peeled off, it must be replaced. At the same time, the surface condition of the journal should also be checked. If there are wear marks, strains, discoloration or other damages on the journal, the crankshaft should be removed for grinding or replacement. While troubleshooting the mechanical components themselves, special attention should also be paid to identifying and analyzing the underlying causes of the malfunction to prevent similar problems from happening again.

 

4. The crankcase smells a special burnt smell and there are signs of oil burning dry around the bearing cover

Hazard analysis: Smelling a special burning smell in the crankcase and signs of oil burning dry around the bearing cover are typical features of main bearing tile burning. Mild cases of tile burning can exacerbate the wear or damage of the main bearings, while severe cases may lead to catastrophic damage to the entire machine.

 

Disposal measures: Once the above situation is discovered, the vehicle should be stopped immediately and quickly reported. The disposal method is to immediately stop the vehicle and start the backup oil pump, seawater pump, and fresh water pump, while prohibiting turning to avoid the expansion of the fault. Do not start the diesel engine without troubleshooting. At the same time, immediately activate the backup diesel engine and strengthen the management of other operating diesel engines.

 

Analysis and elimination: Identify the cause of the malfunction and solve it through maintenance or repair.

 

The main reasons may include:

 

(1) The journal does not meet the requirements. Excessive roughness of the shaft neck can increase the frictional resistance during crankshaft rotation and easily generate high temperatures, leading to the melting of the bearing alloy.

 

(2) Bearing failure. The height of the back of the bearing shell is too low or too high, which is most likely to cause bearing burnout. The quality of the bearing alloy does not meet the requirements, especially if the alloy and the back of the bearing cannot be completely tightly adhered together, it is easy to burn out. Due to the difficulty of heat transfer in the non bonded local alloy layer, the local temperature rises and expands, making it easy to peel off under stress.

 

In addition, inconsistent or automatically deformed centerlines of the main bearing shells can cause the oil film in some parts of the crankshaft to be too thin or form dry friction when rotating in the main bearing shells, resulting in bearing burnout. The concentricity of bearing holes, especially in the vertical plane, as well as the step degree of adjacent bearing holes of multi supported diesel engine crankshafts, have a significant impact on the burning of bearing shells. When adjusting the clearance between the bearing shells, if too many gaskets are added and the width is too small, the clearance between the shaft neck and the adjusting gasket will be too large, causing a large amount of lubricating oil to leak in this clearance, resulting in poor lubrication of the bearing shells. In principle, adjusting the width of the gasket should be consistent with the width of the joint surface on both sides of the bearing shell. A diesel engine that has just been replaced with a new bearing can easily cause bearing burnout if it runs at high speed without meeting the required contact area between the bearing and the journal.

 

(3) Poor fit between the bearing shell and the journal. The contact area between the bearing shell and the journal does not meet the specified requirements, or the gap between the bearing shell and the journal is too large or too small, which is not conducive to the formation of an oil film in the lubricating oil and causes poor lubrication. If the gap is too small, the oil film is prone to rupture, the frictional resistance increases, and the diesel engine is difficult to operate. If the gap is too large, the lubricating oil is prone to loss, the lubricating oil pressure decreases, and it is not easy to form an oil film. The reason for the excessive or insufficient clearance between the bearing and the journal may be not only due to installation issues, but also due to the failure to adjust the clearance between the bearing and the journal when using different bearing alloy materials. For example, the expansion coefficient of aluminum based bearing alloy is larger than that of Babbitt alloy, etc. If aluminum based alloy bearing shells are used instead, the bearing clearance should be correspondingly increased, otherwise it is easy to burn the shells.

 

info-522-389

 

3, Prevention and solution for high temperature of main bearings

The malfunction of high temperature in the main bearings of diesel engines has a significant impact on the safety and mission support capabilities of diesel engines. Therefore, monitoring and alarm devices should be improved in equipment design. In work, equipment maintenance and upkeep plans should be improved based on the characteristics of the equipment. The solution should focus on prevention, including both technical protection and personnel protection. Technical protection focuses on monitoring and alarm, while personnel protection emphasizes use, maintenance, and regular inspection.

 

(1) Improve monitoring technology. Equipment monitoring is currently the most effective means of detecting warning signs of malfunctions. Through scientific and reasonable monitoring work, it is possible to more accurately grasp the operation of ship equipment and changes in equipment technology status, analyze and predict the development trend of equipment performance, propose targeted preventive measures, and eliminate faults in their early stages. At present, the application of equipment monitoring technology has not been fully implemented on all ships.In order to achieve ideal monitoring results and real-time grasp of the technical status of ship equipment, it is necessary to widely promote equipment status monitoring and fault diagnosis technology on various types of ships, and regularly monitor the status of equipment at designated locations, establish monitoring standards, and institutionalize the monitoring of ship equipment. At the same time, it is necessary to establish a monitoring database for the main equipment of ships of the same type, update monitoring data in a timely manner, use computers to analyze the development trend of equipment operating parameters, and develop intelligent diagnostic technology.

 

(2) Strengthen scientific monitoring and application of offshore equipment. Marine monitoring should achieve the following two points: first, adhere to the combination of periodic monitoring and key monitoring. When formulating and implementing monitoring plans, it is important to highlight continuous tracking and monitoring of key equipment. By comparing and collecting data, subtle changes and trends in equipment condition can be effectively and timely discovered, and targeted inspection content and directions can be proposed. The second is to adhere to the combination of special monitoring and crew use. In addition to the equipment included in the periodic monitoring, timely technical status monitoring of the equipment shall be carried out based on the problems discovered in the crew's usage management.

 

The third is to adhere to the combination of monitoring and repair. Monitoring not only needs to discover problems, but also plays a role in helping and guiding repairs. Monitoring should be integrated throughout the entire process of equipment use, management, and maintenance.

 

(3) Optimize maintenance and upkeep. Whether onshore or offshore, strengthening daily maintenance and upkeep is the most fundamental way to ensure the normal use of equipment. For ocean going vessels, equipment usage intensity is high, crew duty tasks are heavy, and equipment maintenance and upkeep cannot be ignored. The equipment maintenance rules for various types of ships should clearly and detailedly indicate the contents and precautions of equipment maintenance, inspection, and repair. According to the maintenance rules and based on the actual situation, a comprehensive and reasonable maintenance content should be established, as shown in Table 1.

 

info-581-447

 

In addition, in the face of heavy tasks and high equipment deployment intensity, equipment maintenance intervals should be flexibly adjusted. For equipment that is used alternately, a reasonable equipment rotation plan should be developed based on maintenance intervals, and timely maintenance and inspection should be organized for equipment that is idle.

 

info-647-411

 

4, Conclusion

船舶柴油机主轴承温度过高故障,在不同型号和不同船舶上,其表现形式和危害程度各有差异.本文针对这一故障现象进行了深入的分析和研究,综合提出了故障预防和解决方案.相关方案可为船舶柴油机的安全使用与维护提供系统化的解决方案.

The malfunction of high temperature in the main bearings of marine diesel engines varies in its manifestation and degree of harm on different models and ships. This article conducts in-depth analysis and research on this fault phenomenon, and comprehensively proposes fault prevention and solutions. The relevant plan can provide a systematic solution for the safe use and maintenance of ship diesel engines.

Send Inquiry