Cummins KTA19 Intercooler Core Radiator Engine Cooler 3001299 Aftercooler

Desc.

Engine Cooler

Part No

3001299

Brand Name

Cummins, Detroit, DCEC, CCEC, XCEC etc.

Other parts

pls contact freely if you need other P/N

Engine Type

Diesel engine, Gas engine, Diesel Generator, Marine engine, Construction engine Pump engine etc.

Spare Type

Wearing spare parts, maintenance tools, repair kit, upper and lower engine gasket kit.

Condition:

Original and brand new

Applicatble industriy

Retail, marine engines, Construction works, Energy & Mining etc

Key Word:

Original spare parts and engine repair tool kits

Trade terms

FOB EXW CIF DDU DDP,

Door to door is available in some countries.

Delivery time:

Most parts are in stock, bulk order based on qty

Payment

T/T, L/C, D/A, Alipay, Western Union, Paypal etc.

Place of origin

China/ USA/ Japan/ Austria/ Mexico

Package

Neutral or original packaging

About the product

Daily inspection

After the cooler is put into use, the operator should conduct regular inspections of the heat exchanger to determine if it is operating normally.

(1) Check the process parameters and strictly prohibit operation under excessive temperature and pressure.

(2) Check for leaks in the partition, large pot, and interface flanges.

(3) Check the stability of the foundation support.

(4) Check the vibration of the cooler and pipelines.

(5) Regularly check the color of the oil and the temperature changes after heat exchange.

Daily maintenance

Coolers often contain calcium, magnesium ions, and acidic carbonates in their cooling water. When the cooling water flows through the metal surface, carbonate is generated. In addition, oxygen dissolved in cooling water can cause metal corrosion and form rust. Due to the generation of rust and scale, the heat transfer efficiency decreases. In severe cases, it is necessary to spray cooling water outside the shell. When scaling is severe, it can block the pipes and render the heat transfer effect ineffective. The research data shows that scale deposits have a significant impact on heat transfer losses. As the sediment increases, it leads to an increase in energy costs, saving energy, extending the service life of equipment, and saving production time and costs.

For a long time, traditional cleaning methods such as mechanical methods (scraping, brushing), high-pressure water, chemical cleaning (acid washing), etc. have encountered many problems when cleaning equipment: they cannot completely remove deposits such as scale, acid liquids corrode equipment and form loopholes, residual acid causes secondary corrosion or corrosion under scale on materials, ultimately leading to equipment replacement. In addition, the cleaning waste liquid is toxic and requires a large amount of funds for wastewater treatment.

Using Fushitech cleaning agent to clean the condenser, Fushitech's high efficiency, environmental protection, safety, and non corrosion not only have good cleaning effects but also do not corrode the equipment, ensuring the long-term use of the condenser. Fushitek cleaning agent (unique addition of wetting agent and penetrating agent) can effectively remove the most stubborn scale (calcium carbonate), rust, oil, mud and other sediments generated in water equipment, without causing harm to the human body. It will not corrode, pitting, oxidize or cause other harmful reactions to materials such as steel, copper, nickel, titanium, rubber, plastic, fiber, glass, ceramics, etc., which can greatly extend the service life of equipment.