During driving, the problem of urea injector blockage often troubles truck drivers and maintenance technicians. Here, we will briefly introduce how to effectively clean the urea injector.
When encountering crystallization of the urea injector or a diagnosis instrument detects a blockage fault of the injector, an ultrasonic cleaning machine can be used to clean the injector, so that it can restore its normal function.
The specific cleaning operation for the urea injector is as follows:
1. Ultrasonic cleaning: A small ultrasonic cleaning machine (the one that can clean glasses) is sufficient;
2. The cleaning solution is recommended to be hot water, and the jetting end should be immersed in the liquid (the electrical plug area should not be immersed in water);
3. The cleaning time should be more than 15 minutes;
4. While cleaning the injector with ultrasonic waves, perform a function test to drive the injector. The cleaning effect will be better.
Note: Perform a function test to drive the injector while cleaning
In addition to mastering the correct method of cleaning the urea injector, it is also important to remember not to use inferior urea solutions. Because when the purity of the urea solution is insufficient and there are impurities such as particles, heavy metal ions, minerals, etc., it will cause a blockage fault of the injector, causing unnecessary economic losses to truck drivers. Therefore, the perfect combination of high-quality urea and correct cleaning of the urea injector can achieve the ideal effect of peace of mind and cost savings.