+86-15123173615

Function and Working Principle of Turbocharger

Nov 02, 2026

Turbocharger Function

The turbocharger usually uses the energy of exhaust gas to drive the turbocharger. The turbocharger provides compressed air for the engine.

Advantages of Turbocharged Engine

Low fuel consumption, low emissions, better torque characteristics, light weight, small size, etc.

Components of Turbocharging System

The system mainly consists of the turbocharger, air circulation valve, air cooler, exhaust bypass valve, turbocharger sensor, etc.

 

Turbocharging Working Principle

Pressure Control. When the engine is running, as the exhaust gas blows, the exhaust side turbine rotates, and the coaxial intake side pump wheel rotates. The air passes through the pump wheel and is pressurized before entering the engine intake pipe, cooled by the intercooler, and then enters the engine to achieve intake pressure boost. The boost pressure sensor (turbo pressure sensor) continuously monitors the boost pressure. The engine control module, based on its signal, controls the opening degree of the exhaust bypass valve to achieve closed-loop control of the boost pressure, allowing the engine boost pressure to work within the target value range.

Air Circulation Valve (Intake Pressure Relief Valve) Control. When the engine operates at high speed and the power demand decreases, the throttle suddenly closes. At this time, the circulation air valve opens, and the boosted air passes through the circulation air valve and circulates back to the pre-turbo stage. At this point, the turbocharger can maintain high-speed operation. When the engine needs to increase boost pressure and power again, the circulation air valve closes, and the turbocharger can quickly intervene and operate, improving the response efficiency of the turbocharger.

info-721-522

 

Reference Flowchart for Turbocharging System Fault Diagnosis

 

info-1080-398

Send Inquiry